240-9043A-S02 | WHIRL-SYSTEMS - Rudolf Koller

Electronic control panel type 240-9043A-SXX
240-9043A-S02

to overview
test mark:240-9043A-S02
line voltage
220 - 240V 50/60Hz
nominal current
16 A by cosφ=1
total connected load
3.6 kW
system of protection
IP X5
weight
625 g
blower
ON/OFF
◊ interval
◊ It is possible to select this function through the basic adjustments.
interval: ON/OFF
status-LED
status LED: The status of the tub is indicated through the status LED.
pump
ON/OFF
◊ interval
◊ It is possible to select this function through the basic adjustments.
interval: ON/OFF
spa light
ON/OFF
zone electronic control panel
motorized valve 12V DC
dry out
◊ automatic/alt. button
◊ It is possible to select this function through the basic adjustments.
Alt. button: Alternatively it is possible to switch on / switch off the function rewash or dry out with an additional button.
Only allowed with a blower.
side LED
connection possible
light therapy
◊ power supply 5V/10V
◊ It is possible to select this function through the basic adjustments.
motorized valve and light therapy max 10W together
1 x 10W
OFF-timer
20 minutes
order num. 240-9043A-S02
3 functions, engine valve and light therapy
type see table

connection possibility for:
dry-running protection sensor
push button with or without LED
output for motorized valve
light therapy
heating
Switches on automatically when the jet pump is running.
motorized valve
12V DC
drive unit for motorized valve
The zone valve works in combination with the pump!
disinfection
Starts through the button disinfection and works then automatically. The bath tub is disinfected after about 35 minutes.
rewash
Function is activated, if water was in the bath tub. Starts about 10 minutes after the tub is empty.
Alternatively it is possible to start / stop this function at empty tub with a button. duration of the rewash: 2 minutes
dry out
Starts automatically, if water was in the bath tub. The dry out starts about 20 minutes after the tub is empty.
Alternatively it is possible to start / stop this function with a button. duration of the dry out: 3 minutes
OFF-timer
The running time limiter is activated, when the status indicator reads „Pool ready“ and the control panel registers the first pressing of the button. All whirlpool functions may be used as much, as you desire during the operating period. Upon reaching the running time limit, appliances switch off automatically. Should all functions be switched off during this time, the running time limiter will also reset automatically. The appliances may be immediately switched on after the automatic stop.

ABOUT KOLLER

The name KOLLER stands for an established family-owned company which has developed dynamically in more than 45 years and is seen as a pioneer in the range of whirlpool technology. The KOLLER International Group consists today next to Whirl Systems, of further following divisions:
Koller International Group
KOLLER METAL & PLASTICS TECHNOLOGY
KOLLER HOLZ
All prices in EURO without VAT - per piece or per m - effective from 2025-01-01 - Changes and errors reserved.
This website uses cookies. With this confirmation or by the continued use of the Web site you agree to our terms of use .
OK No