adhesive socket Ø: 50/32/50 mm

The tee is placed between the vacuum fitting and the pump, along the suction hose/pipe as near as possible to the pump. The tee and vacuum breaker are connected by a Ø 32 mm pipe or hose as close as possible to the tub's rim.

214 g

Prevents foreign substances from being sucked in!
If the vacuum fitting is partly or completely covered, the valve opens instantly. In this way the jet pump sucks air and the suction effect at the vacuum fitting drops immediately.

32 mm

81 g

Prevents foreign substances from being sucked in!
If the vacuum fitting is partly or completely covered, the valve opens instantly. In this way the jet pump sucks air and the suction effect at the vacuum fitting drops immediately.

105 g

plastic

check valve with reinforced spring

3 g